Debian Linux 使用 certbot 申請 Wildcard SSL

想要使用 Let's Encrypt 申請 Wildcard 的 SSL (HTTPS) 憑證，又不想用 snapd。

• 註1：想使用 apt 的 certbot 來申請，要怎麼做？
• 註2：系統為 Debian Linux Buster (10)

Debian Linux 使用 certbot 申請 Wildcard SSL

若想使用 snap 的話，可以參考官網步驟：Certbot

Nginx 的設定可以參考此篇：Let's Encrypt 安裝 與 Nginx 設定

使用 certbot 申請 Let's Encrypt 的 Wildcard SSL 步驟

此次 Let's Encrypt 使用 DNS 驗證模式

1. apt install certbot
2. sudo certbot certonly --manual --preferred-challenges=dns --email [email protected] --server https://acme-v02.api.letsencrypt.org/directory --agree-tos -d example.com -d *.example.com
   • 設定 DNS 要設定兩組 TXT (會出現兩次，要設定兩組)
3. 再來就完成，會得到下述憑證：
   • /etc/letsencrypt/live/example.com/fullchain.pem
   • /etc/letsencrypt/live/example.com/privkey.pem
4. 三個月內要更新憑證：sudo certbot renew
5. 另外需要 hdparm.pem 的製作方式：sudo openssl dhparam -out /etc/nginx/ssl.crt/dhparam.pem 2048

設定 Nginx SSL

1. vim /etc/nginx/sites-enabled/example.com.conf

   server {
       listen 80;
       server_name site1.example.com;
       rewrite ^(.*) https://$server_name$1 permanent;
   }
   
   server {
       listen 443 ssl;
       server_name site1.example.com;
       root /var/www/html/;
   
       access_log /var/log/nginx/site1-example-com.access.log combined;
       error_log /var/log/nginx/site1-example-com.error.log crit;
   
       ssl_certificate /etc/letsencrypt/live/example.com/fullchain.pem;      
       ssl_certificate_key /etc/letsencrypt/live/example.com/privkey.pem;
       ssl_dhparam /etc/nginx/ssl.crt/dhparams.pem; # sudo openssl dhparam -out /etc/ssl/certs/dhparam.pem 2048
       ssl_session_timeout 5m;
       ssl_session_cache shared:SSL:5m;
       ssl_protocols TLSv1 TLSv1.1 TLSv1.2;
       ssl_ciphers ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-DSS-AES128-GCM-SHA256:kEDH+AESGCM:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA256:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA:DHE-RSA-AES256-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:AES:CAMELLIA:DES-CBC3-SHA:!aNULL:!eNULL:!EXPORT:!DES:!RC4:!MD5:!PSK:!aECDH:!EDH-DSS-DES-CBC3-SHA:!EDH-RSA-DES-CBC3-SHA:!KRB5-DES-CBC3-SHA; ssl_prefer_server_ciphers on;
   }

2. sudo systemctl restart nginx.service
3. 就可以測試連線 https://site1.example.com 囉~

作者: Tsung

對新奇的事物都很有興趣, 喜歡簡單的東西, 過簡單的生活. 檢視「Tsung」的全部文章